Back to All Events

Basic CNC Milling

This class will go through basic use of Easel software (on the Inventables web site, basic use of Mach 3, and setup and use of the Techno-Isel. We will go over how to prepare your work in Easel and export your tool path, how to prepare your work piece on the Techno-Isel work surface, and how to load and run your toolpath in Mach 3.

2pm - 3pm: We will go over the process once while walking through the steps. 3pm - 6pm: You will have the chance to do the same. Computers and materials for milling will be provided, if you have a laptop you are welcome to bring it. You will need to create an account in the Easel software on the Inventables website (https://www.inventables.com/technologies/easel) which you can do during the class or before hand. If the time constraints prevent anyone from finishing their project, arrangements can be made to finish up the process another time.

SAFETY: Eye glasses and ear plugs will be provided, or you are welcome to bring your own.

Sign up through Meetup.com: http://www.meetup.com/Ventura-Area-Makers-Builders-Hackers/events/225719552/

Earlier Event: October 15
Intro to Arduino
Later Event: October 22
MAKE Ventura Closed!!!